Table of Contents
Advertisement
Physical Description
2.3.3
DAC A(B) Gain
⋅
DAC Coarse Sets coarse gain of DAC A(B) full scale current. Range is 0 to 15. See the
Gain:
⋅
DAC Fine
Gain:
⋅
DAC DC
Offset:
⋅
Sleep:
2.3.4
NCO
⋅
NCO DDS:
⋅
NCO Phase: Sets initial NCO phase registers. See the DAC5687 data sheet for more
2.3.5
Additional Control/Monitor Registers
⋅
Pll Port
Config:
⋅
Quit:
⋅
Version:
⋅
About:
3
Physical Description
This chapter describes the physical characteristics and PCB layout of the EVM and lists the components
used on the module.
16
DAC5687 EVM
DAC5687 data sheet for full scale gain equation.
Sets fine gain of DAC A(B) full scale current. Range is -128 to 127. See the
DAC5687 data sheet for full scale gain equation.
Sets DAC A(B) DC offset register. Range is -4096 to 4095.
DAC A(B) sleeps when set, operational when cleared.
Sets NCO DDS registers. See the DAC5687 data sheet for formula.
information.
Selection of this button will bring up a separate window that shows the
parallel port configuration of the software. The EVM Menu should be
loaded with DAC EVM. This button also allows the user to change the LPT
address used by the PC. This is set by entering a valid address inside the
box labeled "LPT Address". The default setting is 378.
Quits the operation of the DAC5687 software.
Displays the version of the silicon. If a version of 0 is read then the
communication is not functioning and an error message will be displayed.
Opens an additional window with help related topics for the software.
SLWU017B – APRIL 2005 – Revised March 2007
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
