DAC5687 EVM Operational Procedure
3. Select "Install the software automatically (recommended)" as shown below and then click "Next".
4. If Windows is not able to find the appropriate USB drivers press "Back" and select "Install from a list or
specific location (advanced)". Click "Next".
5. Select "Search for the best driver in these locations" and browse for the folder where the DAC5687
program was installed (the default location is C:\Program Files\Texas Instruments\DAC5687). Once the
file path has been selected, click "Next" to proceed.
8
DAC5687 EVM
SLWU017B – APRIL 2005 – Revised March 2007
Submit Documentation Feedback
www.ti.com