Dac5687 Gui Register Descriptions; Dac5687 Setup For X4 Mode And Nco Tone At F; Dac /15 - Texas Instruments DAC5687 EVM User Manual

www.ti.com
Figure 4. DAC5687 Setup for X4 Mode and NCO Tone at F
2.3

DAC5687 GUI Register Descriptions

2.3.1 Register Controls
⋅
Load Regs:
⋅
Save Regs:
⋅
Read All:
⋅
Send All:
SLWU017B – APRIL 2005 – Revised March 2007
Submit Documentation Feedback
Loads register values from a saved file to the DAC5687 and updates the
GUI.
Saves current GUI registers settings to a text file for future use.
Reads the current registers of the DAC5687. This is used to verify settings
on the front panel.
Sends the current front panel registers to the device. This is generally only
used when the EVM power has recycled or the device has been reset and
the user wants to load the displayed settings to the device.
DAC5687 EVM Operational Procedure
/15
DAC
DAC5687 EVM 13