Table of Contents
Advertisement
www.ti.com
6
Physical Description
This section describes the physical characteristics and PCB layout of the EVM.
6.1
PCB Layout
The EVM is constructed on a four-layer, 0.062-inch thick PCB using FR-4 material. The individual layers
are shown in
Figure 13
performance can be obtained with careful layout using a common ground plane.
SLAU237A – May 2008 – Revised April 2009
Submit Documentation Feedback
through
Figure
18. The layout features a split ground plane; however, similar
Figure 13. Top Silkscreen
Physical Description
ADS62PXXEVM
27
Advertisement
Table of Contents
