Roughing-In: K-842-V-Ab, K-845-V-Ab; Ordering Information; Required Electrical Service; Product Information - Kohler Maestro K-842-V-AB Installation Instructions Manual

1. ROUGHING-IN: K-842-V-AB, K-845-V-AB, K-842-JA-AA, K-845-JA-AA
A. ORDERING INFORMATION
Factory installed components include pump with integral
timer, and air switch transmitter.
Applicable product:
With grip rails (K-9621)
Without grip rails
Accessories/hardware:
Jet trim kit
Grip rails
Drain
Vinyl tiling-in bead*
*Use K-1179 vinyl bead when wall material contacts
any top surface of bath.
*K-9621 are sold separately and are required accesso-
ries.
2-1/4"
16"
32"
9-1/4"
3-1/4"
1-1/2" I.P.S. THR'D
1-1/2" O.D.
1.75>132
CA
111835- (1093)
K-842 shown
K-845 not shown
K-9695 required
K-9621 required for
K-842
K-7161-AF recom-
mended
K-1179 optional
FIELD WIRING
COMPARTMENT
PUMP
66"
2-7/8"
1/4"
3"
B. REQUIRED ELECTRICAL SERVICE
Dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V., 15 A, 60 Hz
or 230 V., 15 A, 50 Hz
C. PRODUCT INFORMATION
Fixture: basin area
Bathing well 46-1/2" x
21"
water depth
To overflow 13"
Pump, 1-speed:
60 Hz
50 Hz
D. INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation.
ROUGHING-IN NOTES
Fixture dimensions are nominal and conform to toler-
ances in ANSI Standard A112.19.1
No change in measurements if connected with drain
illustrated.
Cut-out 64-1/2" x 30-1/2"
Minimum access:
Pump/control box 20" W x 15" H panel required
PUMP/CONTROL ACCESS
3/4"
18-1/4"
4
top area weight
57" x 25" 410 lbs.
capacity
55 gal.
hp V Hz A
3/4 120 60 10
3/4 230 50 5.5
Kohler Co., Kohler WI