Optional Fiber Optic Lens Kit Installation - Graco PRO 5500wb Instructions-Parts List Manual

Optional Fiber Optic Lens Kit Installation

NOTE: The fiber optic lens kit is not included with the
gun. Order it separately; the part number is 236852.
1. Remove the gun from the manifold as instructed
on page 35.
2. Make sure the lens (HH) is clean. Push the lens
into the counterbore (KK) in the manifold fiber optic
port (GG). See Fig. 10 and 11.
3. Press the lens retainer (JJ) into the manifold fiber
optic port (GG) until it is flush with the manifold
surface.
4. Assemble the gun to the manifold as instructed on
page 44.
GG
HH
JJ
Fig. 10
14 308496
Installation
Fig. 11
04484
HH
JJ
GG KK
04485