Display - LG WM3001HRA Training Manual

TRAINING MANUAL
• Always unplug the washer to work on it.
• Be careful to avoid electric shock when disconnecting parts for troubleshooting.
• Some terminals in the steam washer have 120 Volts AC or DC on them,
sometimes even when the washer is off. The motor operates on 310 Volts DC.
• The main board powers down a few minutes after any cycle is completed. The red
LED will go out when the board powers down.
• The steam generator operates at a high temperature. Be careful when servicing it.
It can be drained in place by removing the drain cap, but have a hose or a big
towel ready to soak up the spillage. It is simplest to cool before servicing and
then drain it after removing it from the washer.
The display shows the cycle selected, the progress of that cycle, the time remaining, and
the options selected.
The buttons below the display allow the customer to override certain preset selections.
WM3001H*A
BEFORE PERFORMING SERVICE

DISPLAY

Page 23
WM3001H*A
Washer