Parts Identification - LG WM3001HRA Training Manual

TRAINING MANUAL WM3001H*A

PARTS IDENTIFICATION

The air vent on the back of the machine must be left open and clear at all times.
If the washer and dryer are installed in a closet or closed laundry alcove, there must be
sufficient clearance and ventilation. The closet should have a full louvered door with at
2
least 650 square inches (0.5 m ) of open area for ventilation.
The washer requires a space of at least 1 inch (2.5 cm) between the wall and the
machine on each side and at least 4 inches (10 cm) between the back of the washer and
the wall. Additional space may be needed for servicing.
WM3001H*A Page 13 Washer