Load Sensing Function - LG WM3001HRA Training Manual

TRAINING MANUAL
In order to determine the size and weight of the load, the machine begins each cycle
by tumbling the load a couple of times. It spins up to approximately 120 rpm for
approximately 6 seconds. (Speed and time may vary by model.) Load sensing occurs
on NORMAL and SANITARY CYCLES only.
WM3001H*A

LOAD SENSING FUNCTION

Page 10
WM3001H*A
Determining the
size and weight of
the load allows the
controller to
estimate the
amount of water
required to wash
and rinse the load.
The fuzzy logic
within the program
will make numerous
decisions during the
cycle, adding water,
desudsing, and
rinsing as deter-
mined necessary.
Washer