LG WM3001HRA Training Manual page 29

TRAINING MANUAL
OPTIONS
WM3001H*A
Press STEAM to add steam to any cycle that is marked by
the STEAM indicator on the cycle knob. Note that not all
cycles permit the addition of steam.
Press WASH / RINSE OPTIMIZER® to make the machine
set the optimum water level, wash time, rinse time, and
detergent level. The machine will adjust the washing and
rinsing times according to the amount of detergent used
and the hardness of the water.
Do not be confused into thinking this button will dispense
the correct amount of detergent; instead, it adjusts the
amount of detergent in solution by adding or draining
water during the wash cycle.
Excessive detergent will cause extra rinsing time, while
insufficient detergent will require longer washing. If
detergent is detected at the end of the rinse cycle,
additional rinsing will be added.
Press PRE WASH to add a pre wash cycle to almost any
wash cycle. Add one half as much detergent you would use
for a regular wash cycle into the prewash compartment of
the dispenser.
The PRE WASH cycle fills and washes in cold water
regardless of any wash or rinse temperature set by the
operator or the selected cycle.
PRE WASH adds a 16-minute pre-wash cycle and a spin
cycle to whatever cycle is selected.
This button activates a custom program created by
choosing a cycle and overriding some of the settings using
the option buttons. When the program is determined,
press and hold CUSTOM PGM for three seconds until it
beeps twice. Thereafter, this button will run that custom
program. You can overwrite any custom program by simply
inserting another custom program.
Page 28
WM3001H*A
Washer