LG WM3001HRA Training Manual page 92

TRAINING MANUAL
WM3001H*A
The steam generator can be removed as
an assembly for diagnosis and
replacement or tested in place.
Unplug the washer.
Disconnect all electrical connections,
including ground.
Drain the water. (You can drain the water
after removal from the washer and it is
easier.)
Remove all the cable straps by squeezing
the tabs and pulling them out. They can
be reused.
Remove the four screws holding the
support rail in place and two screws
attaching the steam generator.
Disconnect the hoses (water input and
steam output.) See the next page for a
warning concerning the check valve built
into the input hose.
Push the steam generator toward the back
of the washer to release it from the side
rail. You can then remove it for draining,
inspection, and replacement.
It is available as an assembly only and is
not repairable.
Page 91
WM3001H*A
Washer