Toro Pro Sneak 360 Operator's Manual page 15

Storage
1. Before long term storage, wash the attachment with
mild detergent and water to remove dirt and grime.
2. Check the condition of the hydraulic hoses. Replace
any damaged hoses.
3. Ensure that all hydraulic couplers are connected
together to prevent contamination of the hydraulic
system.
4. Check and tighten all bolts, nuts, and screws. Repair or
replace any damaged or worn part.
5. Paint all scratched or bare metal surfaces. Paint is
available from your Authorized Service Dealer.
6. Store the attachment in a clean, dry garage or storage
area. Cover it to protect it and keep it clean.
15