Toro Pro Sneak 360 Operator's Manual page 5

Figure 3
6. Torque the fittings to 104 to 127 N-m (77 to 94 ft-lb).
7. Secure the bracket to the motor using the 4 bolts (1/2
x 1 3/4 inch), the 4 flat washers (1/2 inch), and the 4
locknuts (1/2 inch) (Figure
Figure 4
8. Torque the bolts to 91 to 113 N-m (67 to 83 ft-lb).
9. Secure the motor assembly to the machine using 4
bolts (1/2 x 1-3/4 inch), 4 flat washers (1/2 inch), and
4 locknuts (1/2 inch)
g021920
4).
g021922
(Figure 5).
10. Torque the bolts to 91 to 113 N-m (67 to 83 ft-lb).
11. Install the joint assembly to the motor assembly. Secure
with the bolt (3/8 inch) and the nut (3/8 x 2-1/2 inch)
(Figure 6).
12. Torque the bolts to 55 to 63 N-m (40 to 45 ft-lb).
5
g021923
Figure 5
Figure 6
g021924