Table of Contents
Advertisement
Overview
This document contains the procedure for installing a thermal conductivity
detector (TCD) on an Agilent 6890 Gas Chromatograph (hereafter referred
to as the GC). Review the safety information on the inside front cover before
following this procedure.
Parts list
EPC
•
TCD
•
Two screws for attaching the detector to the oven top
•
Top insulation
•
Bottom insulation
NonEPC
•
TCD
•
Two screws for attaching the detector to the oven top
•
Makeup and reference gas regulator
•
Two screws for installing the makeup and reference gas regulator
•
Top insulation
•
Bottom insulation
Tools
•
Electrostatic protection such as a grounded wrist strap (part no.
9300-0969 for large wrists or part no. 9300-0970 for small wrists)
•
T-20 Torx screwdriver
•
Diagonal cutters
•
Small flat-blade screwdriver
•
7/16-inch wrench (nonEPC detectors only)
Overview
1
Advertisement
Table of Contents
