Good Habits For Managing The Nap; Hardware Connections; Leds; Nap303 - ZyXEL Communications NAP Series User Manual

Table 3 ZON Utility Fields
LABEL
MAC Address
IP Address
System Name
Location
Status
NCC Discovery
Serial Number
Hardware Version

1.4 Good Habits for Managing the NAP

Do the following things regularly to make the NAP more secure and to manage it more effectively.
• Change the system password through the NCC often. Use a password that's not easy to guess and
that consists of different types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.

1.5 Hardware Connections

See your Quick Start Guide and
connections.

1.6 LEDs

The LEDs of your NAP303 or NAP203 can be controlled using the Suppression feature to turn LEDs on or off
after the device is ready. This can be done through the NCC.
Following are LED descriptions for the NAP series models.

1.6.1 NAP303

The LEDs will stay ON when the NAP303 is ready. You can change this setting with LED suppression.
Chapter 1 Introduction
DESCRIPTION
This field displays the MAC address of the discovered device.
This field displays the IP address of an internal interface on the discovered device that
first received an ZDP discovery request from the ZON utility.
This field displays the system name of the discovered device.
This field displays where the discovered device is.
This field displays whether changes to the discovered device have been done
successfully. As the NAP does not support IP Configuration, Renew IP address and
Flash Locator LED, this field displays "Update failed", "Not support Renew IP address"
and "Not support Flash Locator LED" respectively.
This field displays if the discovered device supports the Nebula Control Center (NCC)
discovery feature. If it's enabled, the selected device will try to connect to the NCC.
Once the selected device is connected to and has registered in the NCC, it'll go into
the Nebula cloud management mode.
Enter the admin password of the discovered device to display its serial number.
This field displays the hardware version of the discovered device.
Section 1.1.1 on page 7
NAP Series User's Guide
14
for information on making hardware