Contact Information; Setting Screensaver - Omron LD-60 User Manual

Contact Information

Help shows information on the installed software and contact information.
NOTE: No contact information will be displayed unless it is set up in the
MobilePlanner software.
In MobilePlanner > Config:
Robot Interface > Touchscreen > ContactInformation
l
Check the ShowContactPage check box.
l
Enter appropriate information in ContactName and the fields following it.
l

Setting Screensaver

In MobilePlanner, select
Config > Robot Interface > Touchscreen
From there, use Screensaver.
If the AMR is in motion when the screensaver comes on, it will use the Busy icon, and display
a status message (where it's going). If the AMR is not in motion, it will display the Available
icon. The rounded rectangle, icon, and any text inside the rectangle will move around the
touchscreen display area.
13732-000 Rev J
Figure 4-9 Help Screen, with Contact Information
LD Platform Peripherals Guide
Chapter 4: Touchscreen
39