Omron LD-60 User Manual page 56

5.2 Components
Ethernet Port
The Ethernet port, on the back of the call/door box, is used to access the built-in web interface
on the box. The port is shown circled near the top of the following figure.
Figure 5-2 Back of Call/Door Box, Showing Ethernet and VDC
Power Supply and Connector
The call/door boxes come with a 12 V power supply, which connects to the back of the call/-
door box. The connection is circled, near the bottom of the preceding figure.
The power supply connector can only be inserted one way into the back of the box.
DIP Switch
A DIP switch, with four positions, is accessible from the back of the call/door box.
56
Figure 5-3 Power Supply Connector
LD Platform Peripherals Guide 13732-000 Rev J