Omron Pocket Pain Pro PM400 Instruction Manual
  1. Manuals
  2. Brands
  3. Omron Manuals
  4. Medical Equipment
  5. Pocket Pain Pro PM400
  6. Instruction manual

Omron Pocket Pain Pro PM400 Instruction Manual

Tens therapy pain relief, pads are for single patient use only
Hide thumbs
Table of Contents

Advertisement

Quick Links

®
INSTRUCTION MANUAL
TENS Therapy Pain Relief
Pocket Pain Pro®
PM400
Pads are for Single Patient Use Only
All for Healthcare

Advertisement

Table of Contents
loading

Related Manuals for Omron Pocket Pain Pro PM400

Summary of Contents for Omron Pocket Pain Pro PM400

  • Page 1 ® INSTRUCTION MANUAL TENS Therapy Pain Relief Pocket Pain Pro® PM400 Pads are for Single Patient Use Only All for Healthcare...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1. INTRODUCTION ......................4 2. INTENDED USE ......................5 3. SAVE THESE INSTRUCTIONS ................... 6 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS ........7 5. HOW POCKET PAIN PRO WORKS................13 6. KNOW YOUR UNIT.....................14 7. ASSEMBLY STEPS .......................16 8.

  • Page 4: Introduction

    1. INTRODUCTION Thank you for purchasing the Omron Pocket Pain Pro Model PM400. In order to use the unit safely, read the complete manual carefully before using the unit for the first time. Keep this instruction manual in a convenient place or store with the unit for future reference.

  • Page 5: Intended Use

    2. INTENDED USE The OMRON Pocket Pain Pro is intended for: The relief of pain associated with sore or aching, muscles of the lower back, arms, legs shoulder, or foot due to strain from exercise or normal household and work activities. When...

  • Page 6: Save These Instructions

    3. SAVE THESE INSTRUCTIONS Symbols Glossary For symbol information, visit: OmronHealthcare.com/symbols-glossary Contraindication Do not use this device if you have a cardiac pacemaker, implanted defibrillator or other implanted metallic or electronic device. Such use could cause electric shock, burns, electrical interference or death.

  • Page 7: Important Safety Precautions And Warnings

    4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury. DO NOT USE THIS UNIT WITH THESE OTHER DEVICES: • Do not use this device while using another TENS device. • Together with a life-supporting medical electronic device such as an artificial heart or lung or respirator.
  • Page 8 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS DO NOT USE ON THESE INDIVIDUALS • Pregnant women. • D o not use on children or infants because this device has not been evaluated for pediatric use. • Keep out of the reach of young children because the electrode cord could cause strangulation.
  • Page 9 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS DO NOT USE THIS UNIT DURING THESE ACTIVITIES • When in the bath or shower; • While sleeping; • While driving, operating machinery, or during any activity in which electrical stimulation can put you at risk of injury. PAIN MANAGEMENT WARNINGS • If you have had medical or physical treatment for your pain, consult with your physician before using this unit.
  • Page 10 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS Indicates a potentially hazardous situation which, if not avoided, CAUTION may result in minor or moderate injury to the user or patient, or cause damage to the equipment or other property. PRECAUTIONS REGARDING THE PADS • Do not move the pads to another location while the unit is on. •...
  • Page 11 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS CAUTION WHILE USING UNIT MAIN UNIT • If the unit is not functioning properly or you feel discomfort, immediately stop using the unit. • Do not use for any other purpose except for what it is intended. • Do not place in a room with high humidity, such as a bathroom. This will damage the unit. Ideal temperature for using 50 °F - 104 °F (10 °C - 40 °C), 30 % - 80 % relative humidity.
  • Page 12 • Ensure that this device has acclimated to room temperature before using. Using this device after an extreme temperature change could lead to an improper operation. OMRON recommends waiting for approximately 2 hours for the device to warm up or cool down when the device is used in an environment within the temperature specified as operating conditions after it is stored either at the maximum or at the minimum storage temperature.

  • Page 13: How Pocket Pain Pro Works

    5. HOW POCKET PAIN PRO WORKS What is it? The OMRON Pocket Pain Pro is a portable device that relieves chronic, acute* and arthritic pain through the pain relief of TENS. It is designed to reduce and relieve muscle and joint pain, stiffness and numbness in the back, arms, legs, shoulder and foot by applying electrical nerve stimulation to the surface of the skin near the site of the pain. Any of the modes can safely be used on body parts or pains described in this manual or the Quick Start Guide/Pad Placement Guide.

  • Page 14: Know Your Unit

    2. Ten intensity levels (1 low to 10 high). 3. Pair of pads (durable, re-usable, washable, up to 150 uses). (Only use OMRON manufactured pads or cords with this unit). 4. Automatic 15-minute shut off. 5. The lights indicate what mode and intensity level the device is set.
  • Page 15 6. KNOW YOUR UNIT BUTTONS AND THEIR FUNCTIONS Mode Light Intensity Light Each light corresponds to a mode. [GET STARTED WITH YOUR THERAPY] STEP 3) [GET STARTED WITH Power Button YOUR THERAPY] STEP 2 and Press once for “ON” and again the Back of Main Unit) for “OFF”.

  • Page 16: Assembly Steps

    7. ASSEMBLY STEPS Before using your unit, inspect to ensure that: 1. Cord is not broken. 2. Pad gel is not damaged. 3. Electrode cord connection is not broken. 4. Unit is intact and working. 5. There is no battery leakage. STEP 1 – INSERT BATTERIES Battery Cover 1 Turn the unit over, and remove 2 Insert batteries. 3 Reinstall the the battery cover using a hard Make sure the battery cover. object (such as the tip of a pen, signs correspond when thin screwdriver).
  • Page 17 7. ASSEMBLY STEPS STEP 3 – SNAP EITHER ELECTRODE CORD TO EACH OF THE PADS For the first time use, take the pads out of the sealed package. CAUTION • Do NOT turn unit on until pads are on your skin. • You MUST USE BOTH PADS or stimulation will not work. NOTE: Pads will not stick if the skin has too much hair. We recommend shaving the area for effective treatment. STEP 4 –...

  • Page 18: Get Started With Your Therapy

    8. GET STARTED WITH YOUR THERAPY (USE FOR A MAXIMUM OF 30 MINUTES PER SESSION) STEP 1 – PAD PLACEMENT CAUTION For optimal therapy: • Place pads on either side of the pain, not directly on the pain. • Place pads at least 1 inch (3 cm) apart. • MUST USE 2 PADS at a time for therapy to work. •...
  • Page 19 8. GET STARTED WITH YOUR THERAPY LOWER BACK Attach one pad below Attach both pads on the lower back according to your pain. and above the region in Place pads on muscle of back, not on spine, for optimal therapy. pain, both on same side.
  • Page 20 8. GET STARTED WITH YOUR THERAPY JOINT (ELBOW) (KNEE) Attach both pads on either side of Attach both pads above the knee or the joint with the pain. above and below the joint with pain. STEP 2 – SELECT 1 OF 5 MODES Press ...
  • Page 21 8. GET STARTED WITH YOUR THERAPY How to change modes during therapy? If you want to change modes during therapy, press the Set/Start button and the ▲(Up) or ▼(Down) button to select a new mode. You can only use ONE MODE at a time. If you don’t press the Set/Start button to select the mode, the unit will automatically turn off after 3 minutes.
  • Page 22 8. GET STARTED WITH YOUR THERAPY STEP 3 – SELECT INTENSITY LEVEL (1 LOW – 10 HIGH) The unit automatically starts at the intensity level of 1. Slowly increase the intensity level by pressing the ▲(Up) button. You should feel a gentle pulsing sensation. How do I select the right intensity level for my pain? Each time you press the ▲(Up) or ▼(Down) button, it moves to another intensity level. If the stimulation sensation becomes weaker or disappears, increase the intensity.

  • Page 23: How To Control And Reduce Your Pain

    9. HOW TO CONTROL AND REDUCE YOUR PAIN When should you start therapy? Use as soon as your pain begins. Start with one session (the unit automatically turns off at 15 minutes). Turn off with pads still on and rate your pain again (1 low to 10 high). Get to your pain early If you get to your pain early, it may prevent the pain from becoming worse, or even chronic.
  • Page 24 9. HOW TO CONTROL AND REDUCE YOUR PAIN What type of pain is it best for? This therapy works best on acute pain because it is localized. Acute pain is pain in one area for less than 3 months. If you have chronic pain, you may have pain in more than one area and for longer than 6 months.

  • Page 25: Cleaning And Storage

    10. CLEANING AND STORAGE The unit is designed for repeated use over time. The pads will last up to 150 uses, or 5 months (based on use of 1 time per day). Here are important cleaning and storage instructions: Cleaning the pads 1. Turn the power off and remove the electrode cord from the pads. 2. Wash the pads when the adhesive surface becomes dirty and/ or the pads are difficult to adhere. • Wash the pad softly with your fingertips under slow running cold water for several seconds (do not use a sponge/cloth/sharp object like a nail on adhesive side, do not use detergents, chemicals or soap).
  • Page 26 10. CLEANING AND STORAGE Storing the pads 1. Turn the unit off and remove the cord from the bottom of the unit. 2. Remove the pads from your body. 3. Leave the electrode cords connected to the pads. Place the pads on the pad holder, one pad on each side with the sticky side of each pad on the pad holder.

  • Page 27: Troubleshooting

    11. TROUBLESHOOTING If any of the below problems occur, check to make sure that no other electrical device is within 12 inches (30 cm). If the problem persists, refer to the table below. If this happens... Possible causes... Try this solution... The intensity is not felt. Are you using only 1 pad? Put the other pad on your Very weak intensity level.
  • Page 28 11. TROUBLESHOOTING If this happens... Possible causes... Try this solution... Power cut off during use. Are the batteries weak? Replace both batteries at the same time. Is the cord broken? Replace cord. Battery Light lights up. Are the batteries weak? Replace both batteries at the same time. Pad gel does not stick to Have you removed the Peel off film on the adhesive skin.
  • Page 29 11. TROUBLESHOOTING If this happens... Possible causes... Try this solution... Pad Light is blinking. Are both pads attached to the Re-attach dislocated pad(s) body? onto the skin firmly. Have you removed the Peel off film on the adhesive transparent film from the surface of pads. pad? Is the cord properly Connect cord plug correctly connected to the main unit? into the jack at the bottom of...

  • Page 30: Limited Warranty

    12. LIMITED WARRANTY Your OMRON Pocket Pain Pro unit, excluding the batteries and pads, is warranted to be free from defects in materials and workmanship appearing within 1 year from the date of purchase, when used in accordance with the instructions provided. The pads supplied with the unit are warranted for 30 days from the date of purchase.

  • Page 31: Specifications

    Device: 5 years Pad: 150 uses NOTE: • These specifications are subject to change without notice. • This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co. Ltd., Japan. Designed for a minimum of 5 years life expectancy.
  • Page 32 13. SPECIFICATIONS Accessories/replacement parts (To order : OmronHealthcare.com) • PMLLPAD-L (3”x4.5” (75 mm × 114 mm)) • PMLLPAD (2.5”x4” (63 mm × 102 mm))

  • Page 33: Fcc Statement

    14. FCC STATEMENT FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

  • Page 34: Guidance And Manufacturer's Declaration

    15. GUIDANCE AND MANUFACTURER’S DECLARATION OMRON Pocket Pain Pro Information for Accompanying Documents in the Scope of IEC60601-1-2:2014 Important information regarding Electromagnetic Compatibility (EMC) PM400 conforms to IEC60601-1-2:2014 Electromagnetic Compatibility (EMC) standard. Further documentation in accordance with this EMC standard is available at OmronHealthcare.com/emc. Refer to the EMC information for PM400 on the website.
  • Page 35 OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto 617-0002 JAPAN Distributed by: OMRON HEALTHCARE, INC. 1925 West Field Court, Lake Forest, IL 60045 U.S.A. For questions: 1-800-634-4350 Get general pain info: OmronHealthcare.com © 2019 OMRON HEALTHCARE, INC. HV-F013-Z2 Made in China 4616057-0A...

Table of Contents