Riding Tips; Starting The Engine - HYOSUNG GV125S Owner's Manual

RIDING TIPS

STARTING THE ENGINE

Before attempting to start
the engine make sure :
1. Inspect every day once
before riding the motorcycle.
2. The transmission is in neutral.
3. The ignition switch is in the
" " position.
4. The engine stop switch is
in the " " position.
5. Moving the side stand to
the fully upper position.
6. Squeeze the clutch lever.
Running the engine indoors
or in a garage
hazardous.
Exhaust
carbon monoxide, a gas that
is color- less and odorless
and can cause
severe injury.
Only run
outdoors where there is a
fresh air.
can
gas contains
death
the engine
Running the engine too long
without riding may cause the
engine to overheat.
Overheating can result in
dam- age to internal engine
components
discoloration
pipes.
Shut the engine off if you
can
promptly.
The
equipped with the side stand
ignition interlock sys- tem.
If the transmission is in
neutral or the side stand up,
you can only start the engine
by squeezing in the clutch
lever.
be
This
interlock system prevents the
motorcycle
started with the side stand
down.
or
Make sure that the side
stand ignition interlock
system is working properly
before riding.
— 41 —
of
not begin your
motorcycle
side stand
from
and
exhaust
ride
are
ignition
being