HYOSUNG GV125S Owner's Manual page 91

Hide thumbs Also See for GV125S:
Table of Contents

Advertisement

the
needle
speedometer turn back to the
rest position.
3.
If there is no spark, clean
the spark plug.
Replace it if necessary.
Retry
p r o c e d u r e
cleaned spark plug or new
one.
4.
If there is still no spark,
consult your dealer for repairs.
Performing the spark test
improperly can be hazardous.
You
could
voltage electrical shock or an
explosion
if
familiar with this procedure.
Do not perform this check if
you are not familiar with the
procedure.
Keep the spark plug away
from the spark plug hole
during this test. Do not this
test if you have a heart
condition or wear a pace-
maker.
of
the
a bo v e
wit
h t he
get
a
high
you
are
not
⊙INSPECTION
the
SYSTEM
1. Place the engine flameout
switch in "
the
in"
"click" of pull-in from the oil
pump relay and there is the
"buzz" of rotation from the oil
pump in the oil tank. If not
start the vehicle immediately,
there
disconnection in oil pump
relay. If there is no above
phenomenon,
circuit system"
2. Inspection of oil pressure: If
the oil pump relay and the oil
pump are normal but the
engine cannot start, check
the oil pressure of the fuel
system. Access the oil pump
gauge in the oil system,
place the engine flameout
switch in the "
and
in"
the oil pressure indication of
the oil pump gauge. The
normal
200kPa. If this value is lower,
check the leakage in oil
system.
— 88 —
OF
"position and
ignition
"position. There is the
will
be
"click"
check
the
ignition
"position, and check
value
is
OIL
switch
of
the
"position
switch
above

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents