HYOSUNG GV125S Owner's Manual page 95

N O T E
Avoid spraying or allowing
water to
following places :
● Ignition switch
● Spark plugs
● Fuel tank cap
● Electric fuel injection
system
● Brake master cylinders
● Cooling system radiator
● Snorkel air intake for air
cleaner
● Electrical
Do not use parts cleaner to
throttle body and electric fuel
injection sensors.
Use a garden hose at low pres-
sure to remove the majority of
dirt or other debris. Wash your
motorcycle by hand with a mild
soap or detergent and water.
Try to thoroughly remove all dirt
and debris without excessive
water pressure.
washing mitts
brushes can be used, be careful
flow over the
Cloth rags,
or cleaning
with brushes
scratch
surfaces.
Rinse
thoroughly with clean water.
Dry all areas using a chamois
or soft absorbent cloth.
★WAXING THE
MOTORCYCLE
After washing the motorcycle,
waxing
recommended to further protect
and beautify the paint.
● Only use waxes and
polishes of good quality.
●
When using waxes and
polishes, observe the
precautions specified by
the manufacturers.
★INSPECTION
AFTER CLEANING
Remove the rags or wrapping
from the exhaust pipe. For
extended life of your motorcycle,
lubricate
"LUBRICATION
section.
— 92 —
as they
plastic or
the motorcycle
and polishing
according
POINTS"
may
painted
are
to