HYOSUNG GV125S Owner's Manual page 84

Inspect the rear axle shaft and
jointing nut for loosening.
⊙TIRE REPLACEMENT
◆
FRONT TIRE
REPLACEMENT
1.
Place the motorcycle on the
center stand.
2.
Remove the brake caliper
from the front fork by
removing the
bolts ①.
Never squeeze
brake lever with the caliper
removed. It is very difficult to
force the pads back into the
caliper assembly and
result brake fluid leak- age.
3.
Loosen the front axle pinch
②.
bolt
mounting
1
the front
may
— 81 —
4.
Loosen the front axle shaft
③.
5.
Place carefully a jack or
under the engine
block
and raise until the front
wheel is slightly off the
ground.
3
Improper
cause damage to the frame or
engine. Do not apply the jack
head to the engine oil strainer
cap when
motorcycle.
6.
Draw out the front axle
shaft ③.
7.
Pull out the front wheel
assembly forward.
8.
To reinstall the front wheel
assembly,
sequence as described.
◆
REAR TIRE
REPLACEMENT
1.
Place the motorcycle on the
2
jacking may
jacking up the
reverse the