Spirit Fluid Rower 900 Series Owner's Manual page 26

》STEP 5 - 3
Support Bracket
》STEP 5 - 4
Elevate Leg with
Bushing Arc
》STEP 5 - 5
Side Rail Bumper
Mount the Front and Rear Support Bracket as pictured.
Insert and se-cure with 4x M6x20mm Bolt on each.
M6x20mm Bolt
M8x45mm Bolt
M8 Washer
M8 Nut
M8 Nylon Nut
M6x20mm Bolt
Mount the Elevate Leg with Bushing as pictured.
Insert and secure them all with 8x M8x45mm
Bolt, 24x M8 Washer, 12x M8 Nut and 12x M8
Nylon Nut.
CAUTION
Elevate Leg with Bushing Arc to the middle.
Reinstall the Bumper with M6x20 bolts back from
Step 2.
26