Elevation Down Sensor - C-Com iNetVu 755A Service Manual

iNetVu New Generation Service Manual
Elevation UP Limit
Sensor
3. Install the new sensor, screwing all the way in until it makes contact with the sensor target. Roll
back and use a 0.35mm feeler gauge to set the distance. Tightening the nut in place.
4. Congratulation you have successfully replaced the EL ST/UP limit sensor.

3.7.3. Elevation Down Sensor

1. Raise the antenna so that the EL Down Limit Sensor lines up with a solid part of the EL Down
flag.
C-COM Satellite Systems Inc.
Page 34 of 53
Elevation Stow
Sensor