Replacing The Polarization Assembly For A 1201 Platform - C-Com iNetVu 755A Service Manual

iNetVu New Generation Service Manual
3.4.

Replacing the Polarization Assembly for a 1201 Platform

Required Materials:
•
Misc hand tools and fasteners
•
Replacement Polarization Assembly
1. Remove cover and disconnect all cable from the POL Cage Assembly.
2. Install Feed Rotator Arm Assembly onto POL Cage Assembly. Ensure the Rotator Feed Arm is
facing in the opposite direction as that from the Feed Horn. Tighten specified screws.
3. Install POL cage assembly onto Feed Arm. Insert side with Rotator Arm first into top Feed
Boom Pivot and ensure its pointing away from reflector.
C-COM Satellite Systems Inc.
Page 26 of 53
Feed Horn
Feed Rotator Arm