iNetVu New Generation Service Manual
4. Insert shoulder screw with 3 spring washers; put 2 washers face to face and the third back to
back to the first 2 on the side opposite to Rotator Arm.
Note: The objective of the washers is to take up free play, such that the Feed Horn Assy does not
have free play from side to side but provide a mild spring pressure. If required fewer or additional
washers may be used with the same number on each side to preserve the symmetry.
5. Insert same amount of spring washers on the other end of the POL Cage shaft and install
retaining ring.
(3) Washers on
Rotator Side
C-COM Satellite Systems Inc.
Page 27 of 53
Washer