Table of Contents
Advertisement
3.5.2.2 Upgrade Firmware from the OMC
1. Go to eNB > Upgrade > Upgrade&Rollback.
2. Select the correct Product Type from the list.
3. Select the checkbox next to the eNB(s) you want to upgrade.
4. In the New Task window, select the Upgrade Type.
5. In the eNB section, select the checkbox(es) next to the eNB(s) you want to upgrade.
6. Next to File List, select/deselect Retain Configuration. Under Select, choose the software
version by clicking in the empty cell (a blue checkmark will appear).
7. Choose the Execute Type, which determines when the upgrade will occur.
8. Select OK.
3.5.3 Basic Configuration Overview
Figure 3-12 indicates four main steps for basic configuration: network interfaces, management
server address, quick settings pertaining to key LTE parameters, and the carrier setting.
Figure 3-12: Configuration Flow
21
Advertisement
Table of Contents
