Pwr Power Supply, Wan/Poe+ Backhaul Configuration; Wan/Poe+ Power Supply And Backhaul Configuration; Figure 3-7: Pwr Power Supply, Wan/Poe+ Backhaul Configuration; Figure 3-8: Wan/Poe+ And Power Supply Backhaul Configuration - Baicells Neutrino430 Installation Manual

3.3.2 PWR Power Supply, WAN/PoE+ Backhaul Configuration:

Connect the cables for the PWR power supply, WAN/PoE+ backhaul configuration, as shown in
the following steps. Refer to Figure 3-7:
1. Connect the AC power supply to the power (PWR) interface on the eNB and the other end
to a power outlet.
2. Connect the Ethernet cable to the WAN/PoE port on the eNB.
3. Connect the other end of the Ethernet cable to the Ethernet port on the Ethernet switch.

Figure 3-7: PWR Power Supply, WAN/PoE+ Backhaul Configuration

3.3.3 WAN/PoE+ Power Supply and Backhaul Configuration:

Connect the cables for the WAN/PoE+ power supply and backhaul configuration, as shown in the
following steps. Refer to Figure 3-8.
1. Connect the AC power supply to the LAN switch and the other end to a power outlet.
2. Connect the Ethernet cable to the WAN/PoE+ port on the eNB.
3. Connect the other end of the Ethernet cable to the PoE+ port on the LAN switch.
4. Connect another Ethernet cable to the Ethernet port on the LAN switch.
5. Connect the other end of the Ethernet cable to the Ethernet port on the Ethernet switch.

Figure 3-8: WAN/PoE+ and Power Supply Backhaul Configuration

17