Table of Contents
Advertisement
Table 3-4: Management Server
Field Name
SSL
Management Server
CloudKey
TR069 Binding
SNMP
SNMP Agent Configuration Option available when SNMP option is enabled:
Trap Agent Configuration
3.5.6 Configure Quick Settings
Under the BTS Setting > Quick Setting window (Figure 3-18) are several important fields you must
configure and/or verify. First, if the operator is using the Baicells CloudCore EPC, you must enter a
fixed Public Land Mobile Network (PLMN) and MME IP address:
•
PLMN = 314030
MME IP = 10.3.0.9 and 10.5.0.9
•
Do not change these settings except when connecting to a Local (private network) EPC or different
vendor's Evolved Packet Core (EPC). Second, you must enter the operator's planned settings for
Band, Bandwidth, EARFCN, Cell ID, PCI, TAC, etc. Some Quick Setting fields such as Duplex Mode
and Frequency will auto-fill based on the eNB hardware model. Make sure the Cloud EPC field is
set to ON when using the Baicells CloudCore. If you are testing the eNB in a lab environment, turn
the power down as low as it will go under the Power Modify field.
Description
Enable/Disable Secure Socket Layer (SSL) using ON/OFF. When enabled
the Management Server field changes to a secure http extension.
Enter the management server IP address and port number
Operators using the Baicells CloudCore are provided a unique CloudKey
identifier that can be used when configuring CPEs and eNBs. If entered
in this field, when the device is powered on it will immediately associate
to the operator's OMC account. You can find your CloudKey ID when you
log in to the CloudCore. It is displayed in the top bar.
Binds TR-069 protocol information to a specific server.
Enabled=OFF/ON
SNMP Version
•
•
SNMP System Name
•
SNMP Port
•
Contact
•
Location
Community String
•
•
Source
Option available when SNMP option is enabled:
•
Trap Community String
•
Trap Server
27
Advertisement
Table of Contents
