Overview; Introduction; Figure 1-1: Neutrino430 Enb; Figure 1-2: Network Structure - Baicells Neutrino430 Installation Manual

Overview

1

1.1 Introduction

The Baicells Neutrino430 (Figure 1-1) is an advanced two-carrier indoor eNodeB that is compliant
with Third-Generation Partnership Project (3GPP) on Long-Term Evolution (LTE) Time Division
Duplex (TDD) technology. This 4x250mW eNodeB can operate in Carrier Aggregation (CA) mode or
Dual Carrier (DC)/split mode. The Neutrino430 supports broadband data access, providing various
data service transformation and transmission capabilities to enable indoor wireless coverage. This
eNodeB can be used by operators to improve capacity and throughput while eliminating existing
dead zones.

Figure 1-1: Neutrino430 eNB

The network structure of the Neutrino430 is shown in Figure 1-2.

Figure 1-2: Network Structure

7