Figure 3-15 LGW = Router
3.5.4.3 Static Routing
When using static routing, go to Network > Static Routing. The Network > Static Routing landing
page has two main sections, Static Routing Config and Validated Route List (Figure 3-16). The
configured static route information is displayed under Static Routing Config. To edit a static route
in the list, click on the edit
icon, enter the information, and click OK. To add a static route,
click
on
the
Add
icon. Fill in the information and click OK. Field descriptions are in
Table 3-3.
Figure 3-16: Static Routing
25