Table of Contents
Advertisement
Figure 3-20: Reboot
3.5.9 Verify eNB Operational Status
When the eNB is finished rebooting, check the eNB status using the eNB GUI and the OMC:
NOTE: Once the eNB is mounted at its intended destination and powered on, recheck the
status settings.
eNB GUI: Go to Basic Setting > Basic Info and check the Cell Status field (Figure 3-21). It
•
should show Active. Also, check that GPS Sync is reported as Synchronized.
OMC: Go to eNB > Monitor to see if the Cell Status shows Active and the Sync Status shows
•
GPS Synchronized (Figure 3-22).
NOTE: Ensure you have selected ALL in the display settings window in the OMC > eNB > Monitor
page to view Cell Status and Sync Status as shown in Figure 3-23.
30
Advertisement
Table of Contents
