Table of Contents
Advertisement
Figure 3-11: WAN/LAN
4. Optional: If a local DHCP server will be used, go to the Network > DHCP menu and
click on the check box next to LAN DHCP Server Enabled (Figure 3-12). Enter the start
(lowest) leased IP address and the end (highest) leased IP address in the range. The
lease time field is used to indicate how long a leased IP address remains active
before it expires. The range of time may be up to 9,999 hours; the default is 12 hrs.
Figure 3-12: DHCP
5. Verify the core network connection between the eNB and the Mobility Management
Entity (MME) in the Baicells CloudCore. Go to Network > MME/IPSec Binding (Figure
3-13). Do not change the IPSec Setting fields. They should be left with their default
values. In the IPSec Tunnel List, verify there are 2 tunnels enabled. The IPSec Binding
should show the 2 CloudCore MME IP addresses, 10.3.0.9 and 10.5.0.9.
Figure 3-13: MME&IPSec Binding
18
Advertisement
Table of Contents
