Web User Interface Error Messages; Web User Error Messages - IBM TS2900 Setup, Operator, And Service Manual

Drive error codes
Table 33. Drive error codes
Code (H)
0200 Invalid data sent to drive.
NAK detected.
0201 Timeout error occurred
while drive is waiting for
response.
0203 Drive disconnected.
0205 Drive busy.
0206 Command could not be
executed because drive is
not mounted.
020E Drive error detected.
020F Unsupported drive
detected.
0222 Media could not be
ejected because drive is
in Prevent Medium
Removal state.

Web User Interface error messages

Table 34. Web user error messages
Title
Error
Description Panel indication
Users full.
You cannot remove yourself.
CHK 0200
1. Reseat all cables. See "Reseating
cables" on page 137.
2. Cycle the power supply and try
CHK 0201
again.
v If the problem is corrected, run
CHK 0203
v If the problem persists, see
CHK 0205
CHK 0206
CHK 020E
CHK 020F
CHK 0222
1. Release the drive Prevent Medium
Removal state from the host.
2. Reseat all cables. See "Reseating
cables" on page 137.
3. Cycle the power supply and try
again.
v If the problem is corrected, run
v If the problem persists, see
Message
User Access
User Access
Action Required
Library Verify before normal
library operations resumes.
"Contacting IBM technical
support" on page 139.
Library Verify before normal
library operations resumes.
"Contacting IBM technical
support" on page 139.
Issuing Panel
Appendix B. Error codes
197