Error Log Utility Procedure
When the System Management Services menu appears, check the error log for any errors. Use the
location code obtained from the SMS error log utiltity to identify the component the error is reported
against. To obtain the location code from the error log utility do the following:
1. Choose View Error Log from the SMS main menu.
2. If an error is logged, check the time stamp.
3. If the error was logged during the current boot attempt, record it.
4. Look up the error in the Chapter 5, "Error Code to FRU Index," on page 241 and perform the listed
action.
442
EserverpSeries 650 Service Guide