Replacing Consumable Parts - Microsoft Surface Go 3 Instruction Manual

4 If you think your device is broken

Replacing consumable parts

This section explains replacing consumable parts.
The Classroom Pen 2 runs on batteries. If it stops working, replace
the batteries.
If the nib of the Classroom Pen 2 is worn out or crushed, replace it.
1 Rotate the cap (red frame) to
remove the battery (AAAA) from
inside.
2 Replace the battery and
reinsert it.
3 Please purchase AAAA
batteries from an electronics
store.
4 If the problem persists even
after replacing the battery,
please contact the Repair and
Support Center for repair.
1 Pinch the nib with tweezers or
similar and pull it out.
2 Insert a new nib into the tip of
the pen.
3 If the problem persists even
after replacing the nib, or if there
are no nibs to replace, please
contact the Repair and Support
Center for repair.
62