Introducing The Speedtouch - THOMSON SpeedTouch 580 Installation And Setup Manual

1 Introducing the SpeedTouch™

Introduction
Key features
Identifying your
SpeedTouch™
E-DOC-CTC-20050126-0005 v1.0
In a minute you will be able to access the Internet using your SpeedTouch™580(i)
This Installation and Setup Guide will show you how to set up your SpeedTouch™
and how to connect a computer or a local area network (LAN) to the Internet.
Your SpeedTouch™ offers you following features:
A full operating system independent Internet Gateway Device
Interfaces:
Wi-Fi 802.11b/g
USB v1.1 slave port
Four RJ-45 Ethernet ports
Networking support and services:
DHCP, Dynamic DNS, event logging
Port mapping, Embedded Hyper-NAT, NAT application helpers
Stateful Inspection Firewall, intrusion detection, Parental Control
UPnP
Management:
Easy Setup and Management
User friendly web based configuration
Firmware upgradeable
Home Network Install Wizard
On Demand Remote Management
The label on the bottom side of your SpeedTouch™, informs you on the
SpeedTouch™'s:
Product name
Model number
Serial number
! Do not remove, nor cover the marking label.
Chapter 1
Introducing the SpeedTouch™
7