THOMSON SpeedTouch 580 Installation And Setup Manual page 23

Multi-user
E-DOC-CTC-20050126-0005 v1.0
When multiple PCs are used with a single SpeedTouch™, you can run the Home
Install Wizard on each PC to ensure correct TCP/IP settings on the PCs to connect to
the SpeedTouch™.
The Home Install Wizard will detect your SpeedTouch™ device and sense that the
SpeedTouch™ has already been configured. You will be given the choice to
reconfigure the SpeedTouch™ or not.
Select No, if you only want to configure the PC, and click Next.
1
Select Assign IP address automatically. For Fixed IP configuration, refer to the
2
Operator's Guide. Click Next.
To close the wizard, click Finish.
3
Chapter 3
Internet Access in No Time
21