Mounting The Ups In A 23" Rack - Powerware 5115 RM User Manual

Mounting the UPS in a 23" Rack

Use the following procedure to install the UPS in a 23" rack
configuration:
1. Place the UPS on a flat, stable surface with the front of the UPS
2. On each side of the UPS, attach the short end of a mounting
Powerware 5115 Rack-Mount User's Guide
®
facing toward you.
bracket to the UPS using two of the supplied M3 l 6 screws
(see Figure 7).
164201449 Rev A www.powerware.com
Installation
23