Table of Contents
Advertisement
Troubleshooting
Alarm or Condition
Continuous beep.
3 beeps every 10 seconds.
Continuous beep.
Continuous beep.
50
Possible Cause
Action
UPS fan fault.
Save your work and turn off your equipment. Turn off
and unplug the UPS. Contact your service
representative. The alarm cannot be silenced.
Failed attempt to start the
Plug the UPS into a power outlet for 24 hours to charge
UPS on battery.
the battery. After charging the battery, press and hold
the
indicator. The alarm cannot be silenced.
If the
Maintenance" on page 39 to replace the battery.
The output wave is
Shutdown is imminent. Save your work and turn off
abnormal while the UPS is
your equipment. Turn off and unplug the UPS. Contact
on battery.
your service representative. The alarm cannot be
silenced.
The output voltage is below
Save your work and turn off your equipment. Turn off
or above the limit while the
and unplug the UPS. Contact your service
UPS is on battery.
representative. The alarm cannot be silenced.
Powerware
5115 Rack-Mount User's Guide
®
button for 3 seconds; then check the
indicator still flashes, see "UPS
164201449 Rev A www.powerware.com
Advertisement
Table of Contents
