Table of Contents
Advertisement
ADW-4302v2 User Guide
Configuration Program
The ADW-4302v2 contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Netscape 7
•
Internet Explorer V5.01 or later
Preparation
Before attempting to configure the ADW-4302v2, please ensure that:
•
Your PC can establish a physical connection to the ADW-4302v2. The PC and the
ADW-4302v2 must be directly connected (using the Hub ports on the ADW-
4302v2) or on the same LAN segment.
•
The ADW-4302v2 must be installed and powered ON.
•
If the ADW-4302v2's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the ADW-4302v2 is allocated a
new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the ADW-4302v2:
1. After installing the ADW-4302v2 in your LAN, start your PC. If your PC is already
running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the ADW-4302v2, as in
this example, which uses the ADW-4302v2's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter default user name admin
and password admin.
10
Advertisement
Table of Contents
