Planet ADSL 2/2+ VPN Firewall Router ADW-4302A v2 User Manual page 55

Planet technology adsl 2/2+ vpn firewall router user's manual
Table of Contents

Advertisement

Operation and Status
VC 1 Status
VC 2 Status
VC 3 Status
VC 4 Status
Internet (VC1)
Connection Method
Connection Status
Internet IP Address
LAN
IP Address
Network Mask
DHCP Server
MAC Address
Wireless
Name (SSID)
Region
Channel
Wireless AP
Broadcast Name
System
Device Name
For each VC (Virtual Circuit), the current status is dis-
played. This will be either "Enabled" or "Disabled".
Note: VC 1 is a standard (Routed) Internet connection. VC
2, VC 3 and VC 4 are Bridge-mode connections.
Displays the current connection method, as set in the Setup
Wizard.
This indicates the current status of the Internet Connection
Active - Connection exists
Idle - No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
Failed - The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
If there is an error, you can click the "Connection Details"
button to find out more information.
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
The IP Address of the ADW-4302v2.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
This shows the MAC Address for the ADW-4302v2, as
seen on the LAN interface.
If using an ESS (Extended Service Set, with multiple ac-
cess points) this ID is called an ESSID (Extended Service
Set Identifier).
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the
Wireless screen.
This indicates whether or not the Wireless Access Point
feature is enabled.
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adw-4302b v2

Table of Contents