Table of Contents
Advertisement
Advanced Features
Data - Special Applications Screen
Checkbox
Use this to Enable or Disable this Special Application as required.
Name
Enter a descriptive name to identify this Special Application.
•
Incoming
Ports
•
•
•
Outgoing
Ports
•
•
Figure 50: Special Applications Screen
Type - Select the protocol (TCP or UDP) used when you receive
data from the special application or service. (Note: Some applica-
tions use different protocols for outgoing and incoming data).
Start - Enter the beginning of the range of port numbers used by
the application server, for data you receive. If the application
uses a single port number, enter it in both the "Start" and "Finish"
fields.
Finish - Enter the end of the range of port numbers used by the
application server, for data you receive.
Type - Select the protocol (TCP or UDP) used when you send
data to the remote system or service.
Start - Enter the beginning of the range of port numbers used by
the application server, for data you send to it. If the application
uses a single port number, enter it in both the "Start" and "Finish"
fields.
Finish - Enter the end of the range of port numbers used by the
application server, for data you send to it. If the application uses
a single port number, enter it in both the "Start" and "Finish"
fields.
59
Advertisement
Table of Contents
