Table of Contents
Advertisement
ADW-4302v2 User Guide
•
Firewall. All incoming data packets are monitored and all incoming server re-
quests are filtered, thus protecting your network from malicious attacks from
external sources.
•
Protection against DoS attacks. DoS (Denial of Service) attacks can flood your
Internet connection with invalid packets and connection requests, using so much
bandwidth and so many resources that Internet access becomes unavailable. The
ADW-4302v2 incorporates protection against DoS attacks.
Package Contents
The following items should be included. If any of these items are damaged or missing,
please contact your dealer immediately.
•
The ADW-4302v2 Unit
•
Quick Installation Guide
•
User's Manual CD
•
Power Adapter
•
1 RJ-45 Cable
•
1 RJ-11 (ADSL) cable
Physical Details
Front-mounted LEDs of ADW-4302v2
POWER
On - Power on.
Off - No power.
STATUS
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware
Upgrade.
For each port, there are 2 LEDs, to indicate the connection speed
LAN
(10BaseT or 100BaseT) of each port.
•
•
•
Figure 2: Front Panel of ADW-4302v2
100 LNK/ACT - This will be ON if the LAN connection is using
100BaseT, and Blinking if data is being transferred via the cor-
responding LAN port.
10 LNK/ACT - This will be ON if the LAN connection is using
10BaseT, and Blinking if data is being transferred via the corre-
sponding LAN port.
If neither LED is on, there is no active connection on the corre-
sponding LAN port.
4
Advertisement
Table of Contents
