Table of Contents
Advertisement
ADW-4302v2 User Guide
Windows 98/ME
1. Click Start - Settings - Dial-up Networking
2. Select Make New Connection
3. Type a name for this connection, and ensure that "Microsoft VPN Adapter" is
selected. Click "Next" to continue.
4. Enter the Internet IP address or domain name of this device. (If you don't have a
fixed IP address, you can use a Dynamic DNS service to obtain a domain name.)
Click "Next" to continue.
5. Click "Finish" to exit the Wizard.
The new entry will now be listed in "Dial-up Networking".
If necessary, you can change the settings for this connection by right-clicking on it,
and selecting Properties.
To force all outgoing traffic to be sent via VPN, enable the setting This is the default
Internet connection on the Dialing tab. (Do NOT enable this setting if using Dial-up or
PPPoE client software.)
Figure 68: Windows ME VPN Adapter
Figure 69: Windows ME VPN Remote Host
90
Advertisement
Table of Contents
