Introduction
WLAN
On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless
access point. This includes "network traffic" as well as user data.
ADSL
On - ADSL connection is available.
Off - No ADSL connection available.
Flashing - Data is being transmitted or received via the ADSL
connection.
Internet
On - Internet connection is available.
Off - No Internet connection available.
Flashing - Data is being transmitted or received.
Rear Panel
RESET Button
(Reset to De-
faults)
POWER port
10/100BaseT
LAN connec-
tions
ADSL port
Figure 3: Rear Panel of ADW-4302v2
This button will reset the ADW-4302v2 to the factory default
settings.
To do this, press and hold the Reset Button for five (5) sec-
onds, until the Status LED is lit, then release the Reset Button,
and wait the ADW-4302v2 to restart using the factory default
values.
Connect the supplied power adapter here.
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the ADW-4302v2 will automatically function
as an "Uplink" port when required. Just connect any port to a
normal port on the other hub, using a standard LAN cable.
Connect this port to your ADSL line.
5