PC Configuration
To connect:
•
Check the checkbox Allow me to connect to the selected wireless network, even
though it is not secure.
•
The Connect button will then be available. Click the Connect button, and wait a
few seconds for the connection to be established.
If using WEP Data Encryption
If WEP data encryption has been enabled on the ADW-4302v2, Windows will detect
this, and show a screen like the following.
To connect:
•
Enter the WEP key, as set on the ADW-4302v2, in the Network Key field.
•
Re-enter the WEP key into the Confirm Network key field.
•
Disable the checkbox Enable IEEE 802.1x authentication for this network.
•
Click the Connect button.
If this fails, click the Advanced button, to see a screen like the following:
Figure 29: WEP (Windows XP)
39