Table of Contents
Advertisement
ADW-4302v2 User Guide
Firewall Rules
The Firewall Rules screen allows you to define "Firewall Rules" which can allow or
prevent certain traffic. "Traffic" means incoming connection attempts, not packets.
By default:
•
All Outgoing traffic is permitted.
•
All Incoming traffic is denied.
Because of this default behavior, any Outgoing rules will generally Block traffic, and
Incoming rules will generally Allow traffic.
Firewall Rules Screen
An example screen is shown below.
Data - Firewall Rules
Incoming Rules
#
Enable
Service Name
Action
LAN Server
Figure 53: Firewall Screen
For the default rule, this will display "Default".
For rules which you create, this will display a radio button
which allows you to select the rule.
Indicates whether or not the rule is currently enabled.
For rules you have added, this column will contain a checkbox,
allowing you to easily enable or disable the rule. (Click "Save"
after making any changes.)
The Service covered by this rule.
The action performed on connections which are covered by
this rule.
The PC or Server on your LAN to which traffic covered by this
rule will be sent.
64
Advertisement
Table of Contents
