Rear Panel
WAN port
(10/100BaseT)
ë Note
10/100BaseT
LAN connections
ë Note
XRT-401C rear panel
XRT-402C rear panel
XRT-204C rear panel
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
If the connection cannot be established (WAN
LED is not on), please connect to the Uplink
port instead, and check if the supplied
cable is broken.
Use standard LAN cables (RJ-45 connectors) to connect your PCs to
these ports.
If the connection cannot be established (LAN
LED is not on), please connect to the Uplink
port instead, and check if the supplied
cable is broken.
Introduction
5