Using Operation Bar - Panasonic BB-HCM371A Operating Instructions Manual

1.2.3

Using Operation Bar

End Display When the pan/tilt has reached the end (Left End,
and Preset Right End, Up End and Down End), End Display
Display: appears. When clicking a preset button, the preset
name appears.
Pan/Tilt
Moves the lens throughout the horizontal (
Scan:
vertical (
position.
Pan/Tilt/ Controls lens direction.
Home
Pan (
Position:
[Default])
Preset Applies the camera direction to a preset position.
Button: You can preset 8 positions (see page 25—page
28).
Alarm When the External I/O detects a signal, the camera
Position: can be set up to turn to this position. Only an
administrator can operate it (see page 25).
Brightness: Changes brightness in nine steps including [STD]
(Standard). Clicking [-] or [+] changes the image
brightness.
Output Controls output signals of the External I/O.
Control:
Refresh Sets a refresh interval. (Motion—60-second
Interval: interval)
Resolution: Selects [640 x 480] or [320 x 240] (default) pixels.
Image Selects the image quality.
Quality:
•
•
•
[For assistance, please call: 1-800-272-7033]
) range, and returns to the original
: Left, : Right), Tilt (
: Down) and Home Position (
[Favor Clarity] optimizes the image for good
clarity.
[Standard] keeps the standard quality. (default)
[Favor Motion] optimizes the image for motion
display.
Operating Instructions
) or
: Up,
: Center
23